Thinking about carving a large wooden spoon? Or another cool carving project? Check out this DIY project where I carved a spoon out of cedar!
This large wooden spoon has been on my list of fun projects for a long time. I used several old cedar cut-offs from previous projects to glue up my blank which I slowly carved away using a variety of different cutting tools. Now I may have taken the long way around the horse by committing myself to this giant glue-up, but the pieces had sentimental value from past projects so the sacrifice in time and effort was well worth it to me. My friend Anne from ‘Anne of All Trades‘ took the time to forge a draw knife which I permanently attached to the sculpture once I was finished carving. There is a bit of back story to spoon carving between Anne and I which I outline in the video down below. I encourage you to check it out if you haven’t already. As always, thanks for stopping by and have a great day.
Cheers – April
Things I Used In This Carving A Large Wooden Spoon Project:
ISOtunes Bluetooth Hearing Protection
Triton SuperJaws
Triton 7″ Planer
Titebond III
Blue Clamps
Triton Drills
Stihl 271 Farm Boss
Instant Bond
Stihl Chaps
Stihl 181
Stihl 170
Respirator
Arbortech Turboplane
Arbortech Mini Grinder
Arbortech Ball Gouge
Triton ROS
Triton Palm ROS
Titebond II
Some of the links above are affiliate links. If you make a purchase using one of these links, I will get a small commission from the sale of the products. In a small way it helps to keep this website alive and kicking and I appreciate your support in this way.
Cheers – April