Folding Workbench Plans

When building shop projects my main design criteria is function.  This folding work bench is just that.  When needed, this sturdy little table drops down, the legs lower out, and its ready to go to work. When I’m done, it simply folds up and stows neatly on the wall and is nearly unnoticeable.

The top of the bench is customizable and when folded against the wall, you’re looking at just 6 inches of structure protruding from the wall space.  Again, it’s hardly noticeable. This building plan completely walks you through all of the steps in detail on how to recreate this folding workbench.  With the purchase of the plans you will receive the following:

  • A detailed list of raw materials, consumables, and quantities needed of each.
  • A color coded visual cut list of all the raw material.
  • About 10 easy to follow detailed steps which walk you through the entire construction of the stand.
  • Cut list overlaid onto standard lumber and is smartly dimensioned for minimal waste.
  • All assembly steps are color coded for easy tracking and understanding.
  • Fully dimensioned CAD diagrams to eliminate any guess work

I’ve also uploaded a short summary video to go along with this build and shared it on my YouTube channel found HERE.




Once you purchase the plan, you will receive an email that includes a link to download the plan immediately. If you do not see the email in your inbox then be sure to check your spam folder to see if it was sent there. If you run into any problems please email me at [email protected]


1 review for Folding Workbench Plans

  1. robmasongeneva (verified owner)

    Wonderful clear and easy to use plans. I used these plans as a starting point and then modified for the space I had for my workbench. This involved increasing the size of the work bench top (75 (length) x 33 (width)) and also increasing the height to 36 inches (countertop height). This meant my legs extended below the ends of the table when it is folded up (not a problem). I also added a third support beam under the middle of the bench and added a third leg given my version is a bit longer than April’s (this also meant I had to cut the piano hinge into two parts to accommodate the middle leg). Then I painted all of the wood that is exposed when the table is folded up to white (just used a Kilz Primer) to make it better blend in to my garage walls. Thanks for the inspiration and idea, April. I am new to woodworking and this project took less than half a day (except for waiting for the paint to dry in between coats!). I would submit a photo, but don’t know how to do it in this reviews section!

Add a review