Horizontal Board on Board Fence | Pickets and Trim

Thinking about building your own Horizontal Board on Board Fence? Check out this DIY project where I show you the second part – The pickets and trim!

In this second Fence video, I’m going to be showing how to set the top cap, the picketing, the trim and the ground work.

If you missed the first video, you can see that here.

First, lets attach the top cap. This is the board that stretches horizontally from the top of one post to another and is really straight forward to attach.

horizontal board on board fence pickets and trim00 00 29 10still001
Horizontal Board on Board Fence | Pickets and Trim 28

You can basically throw the board up on top of the post then drive a few screws into the top rail to hold it in place. One thing to pay attention to is to not pull or push the posts out of straight. Again, here is where a string line can be useful.

horizontal board on board fence pickets and trim00 00 40 15still002
Horizontal Board on Board Fence | Pickets and Trim 29

We once again set it from the very end of the fence to the start but this time, up top. Then we referenced off the string line by 1” to set all the caps in the same line. This top cap will not only help stablize the top of the fence posts by tying them all together, but also looks nice. It has an overhang on the front in order to give the final fence some depth and texture when complete. The amount of overhang can be customized of course, depending on what you think looks nice. 

horizontal board on board fence pickets and trim00 01 09 12still003
Horizontal Board on Board Fence | Pickets and Trim 30

Now on to the major step of adding pickets.

With a board on board, the goal is to have 100 coverage and no visibility through the panel. The order of operations is I first laid down the back layer of pickets, these are attached directly to the posts.

horizontal board on board fence pickets and trim00 01 35 05still005
Horizontal Board on Board Fence | Pickets and Trim 31

Then I came back and attached the top layer. These are nailed into the bottom layer of pickets that they overlay on the left, right, and also the center support. Each picket getting two nails per position, per picket.

horizontal board on board fence pickets and trim00 01 46 24still006
Horizontal Board on Board Fence | Pickets and Trim 32

I went ahead and did up the first bay of the fence completely to make sure my spacing and technique was going to work out. It looked great, in my opinion, so I carried on.

horizontal board on board fence pickets and trim00 01 59 26still007
Horizontal Board on Board Fence | Pickets and Trim 33

To make things more efficient though, I did the pickets in stages. Meaning I went down the entire length of the fence and first only focus on attaching the back layer of pickets first.

horizontal board on board fence pickets and trim00 02 08 16still008
Horizontal Board on Board Fence | Pickets and Trim 34

A few things to keep in mind if you’re going to replicate this project: I used a level when placing the top most picket then also would check about every 4th or 5th as I moved down a panel, just to make sure I wasn’t getting off. If you find you are, just cheat it back into level on that picket if its just a small amount, or over the next few pickets if it’s a large amount.  

horizontal board on board fence pickets and trim00 02 20 18still009
Horizontal Board on Board Fence | Pickets and Trim 35

I made a spacer to the needed gap height and this takes out almost all the thinking on this step. It’s key that the spacer is made from something straight, so I grabbed some plywood and ripped it to the needed height at the tablesaw, then attached a handle.

horizontal board on board fence pickets and trim00 02 40 04still010
Horizontal Board on Board Fence | Pickets and Trim 36

The gap you go with will be determined on how wide your pickets are, but you want to aim for 3/4” overlap on each side of the picket. This will ensure that as the pickets shrink, no gaps will appear in the fence line. 

As I said before, the pickets are attached with two nails at the three different locations. One thing to note here is to buy stainless steel ring shank nails. The stainless steal will prevent your fence from developing those discolored water marks and the ring shank will prevent them from backing out over time as the wood moves. For attaching them, I think investing in a nailer is 100% worth it. I purchased this one three years ago when I tackled my last fence and it’s more than paid for itself. I can hold down the trigger and just bump the head into the picket for it to shoot a nail. I actually ended up timing myself and it was taking me roughly 4 mins per panel with my process. 

horizontal board on board fence pickets and trim00 03 05 06still011
Horizontal Board on Board Fence | Pickets and Trim 37

When buying pickets…I went with Western Red Cedar for this entire build. If you’re interested in finding a dealer near you, you can find one HERE!

horizontal board on board fence pickets and trim00 03 24 05still013
Horizontal Board on Board Fence | Pickets and Trim 38

Not only is the material beautiful and has naturally rot resistant qualities, but these pickets are 3/4” which are considerably thicker than standard. Normally when buying a large bundle of material, there are several pieces that have to be weeded out and discarded but I didn’t have a single board that was unusable in this project, which was a first for me. 

horizontal board on board fence pickets and trim00 03 20 15still012
Horizontal Board on Board Fence | Pickets and Trim 39
horizontal board on board fence pickets and trim00 03 28 29still014
Horizontal Board on Board Fence | Pickets and Trim 40

One thing that sped that up though was Jake and Justin (who is my videographer) would stage the needed number of pickets at the different bays. This not only saved me time but also my energy. Even though this is a simple step, it’s the middle of summer and is very draining on the body. But after making it down to the end, it was back to the beginning to start phase two of picketing. 

horizontal board on board fence pickets and trim00 03 54 23still015
Horizontal Board on Board Fence | Pickets and Trim 41

Now this stage was actually the quickest of the entire project because Jake came up with a very clever jig to speed it up drastically. He grabbed a 2×4 and made some steps, or some shelves I guess, at the needed distance of the pickets.

horizontal board on board fence pickets and trim00 05 24 15still016
Horizontal Board on Board Fence | Pickets and Trim 42

This jig could be clamped into position on the left of each bay where the small shelf was resting on the center of the bottom layer picket so that the top layer picket could simply be set on top, manually positioned left or right, then nailed down. Jake could feed in the pickets while I attached my side of things, then before moving the jig, Jake could go through and quickly secure his side. Then the jig could be unclamped then moved down to the next seam and repeated. This took took the time down from 4 mins per bay to under 1 min, so it’s certainly worth the time to make it. 

horizontal board on board fence pickets and trim00 05 20 28still017
Horizontal Board on Board Fence | Pickets and Trim 43
horizontal board on board fence pickets and trim00 05 57 18still018
Horizontal Board on Board Fence | Pickets and Trim 44

Something I chose to do along the very bottom of the fence is to make the very last picket a treated board instead of cedar. So when placing the top layer of pickets, you can only work down so far or you’ll cover up where the treated board needs to be placed. So after getting all the top layer pickets attached, we next went back to the bottom of each bay and first added on the treated board, then attached what will be the very last top layer picket.

horizontal board on board fence pickets and trim00 06 32 13still020
Horizontal Board on Board Fence | Pickets and Trim 45

Oh, and just a note here…we used a 12’ treated board here which spans two bays instead of a single. Only reason for this is because 6 foot treated boards don’t exist and an 8’ board would create a bunch of waste. The boards that will be the most susceptible to rot are the ones in either direct contact to the ground or closest contact. So by using a treated board at the very bottom, I’m hoping that will extend it’s lifespan. 

horizontal board on board fence pickets and trim00 06 42 16still019
Horizontal Board on Board Fence | Pickets and Trim 46

Man, that was a ton of work. We are getting close to finishing up so hang tight.

horizontal board on board fence pickets and trim00 06 54 25still021
Horizontal Board on Board Fence | Pickets and Trim 47

Next up is trim, which this style has very little of. It’s really just these seams where the pickets butt up to one another. A vertical 1x board is attached to each one which not only covers up the but joint but also the dog ear of each picket. It’s a simple but drastic change.

horizontal board on board fence pickets and trim00 07 09 28still022
Horizontal Board on Board Fence | Pickets and Trim 48

The bottom can be lined up with the post, which you can see I do by peaking at the bottom of the fence. After shooting in one nail, Jake plumbed it up at the top then it could be attached all the way up before moving the whole operation over to the next seam and repeating. 

horizontal board on board fence pickets and trim00 07 18 28still023
Horizontal Board on Board Fence | Pickets and Trim 49
horizontal board on board fence pickets and trim00 07 40 04still024
Horizontal Board on Board Fence | Pickets and Trim 50

Now on my last fence I actually purchased pre stained pickets and I liked this because the entire board was coated and it also saved time when installing. However, I wasn’t able to find prestained pickets this go around so instead I got out the airless sprayer and applied three coats of an oil based Simi translucent cedar colored stain to each side of the fence.

horizontal board on board fence pickets and trim00 07 45 06still025
Horizontal Board on Board Fence | Pickets and Trim 51

I do recommend coating both sides of the fence if possible. Even though Western Red Cedar is naturally rot resistant, all these additional things….like adding a stain or keeping it from contacting the ground, is only going to add more time to it.

horizontal board on board fence pickets and trim00 08 06 01still026
Horizontal Board on Board Fence | Pickets and Trim 52

Don’t get me wrong, a fence is a big project because of it’s scale, but if you break it down into steps, everything is actually quite easy. I would recommend not doing it in the middle of summer to make it even easier. However, whenever you do it, if a fence is on your to do list then there is a lot of money to be saved by tackling it yourself. Plus, it’s a wonderful feeling after it’s completely to have people ask “who built your fence?” And you get to answer “I did”.

Fence 1
Horizontal Board on Board Fence | Pickets and Trim 53
Fence 2
Horizontal Board on Board Fence | Pickets and Trim 54

Again, in case you missed part 1 of this build, you can find that here.

I’ve also built a vertical board on board fence that I’ve also built here.

If you haven’t already, don’t forget to sign up at the top of this page for my newsletter so you don’t miss new projects!

Share This Project!

Twitter
Facebook
Pinterest
LinkedIn
Tumblr
Email

Related Projects