Well, since finishing the shop build I’m now back to building the other things I’ve been needing. First on the list is a proper workbench. I’ve built a couple of workbenches in the past but not of this size. I kept it simple by using a full sheet of 4×8 plywood for the top but jazzed up the ends with some french cleats for hardware bin storage. Down below I outfitted the feet with some quick release casters from Rockler. All and all the table came out perfectly and is going to serve me well for future projects. If you’re interested in building your own, you can find the plans here. Check out the video down below to learn a bit more.
Things I Used in This Project:
Some of the links above are affiliate links. If you make a purchase using one of these links, I will get a small commission from the sale of the products. In a small way it helps to keep this website alive and kicking and I appreciate your support in this way. Cheers – April